LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (Exhaust System) >> Exhaust System Removal/Installation >> Exhaust Manifold Removal Note

Exhaust Manifold Removal Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner and air hose.
  2. Remove bolt A on the water bypass pipe before removing the exhaust manifold.

    Tightening torque 

    64-89 N.m (48-65 ft.lbf) 

    Fig 1: Removing Water Bypass Bolt A
    G01913604Courtesy of MAZDA MOTORS CORP.