Integrated Stiffener Installation Note: ZM

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Hand-tighten the lock bolt A.

Fig 1: Identifying Lock Bolt A
Courtesy of MAZDA MOTORS CORP.
Hand-tighten the lock bolt B.

Fig 2: Identifying Lock Bolt B
Courtesy of MAZDA MOTORS CORP.
Tighten the lock bolt C.
Tightening torque

37-52 N.m {3.8-5.3 kgf.m, 27.3-38.3 ft.lbf}
Tighten the lock bolt D.
Tightening torque

37-52 N.m {3.8-5.3 kgf.m, 27.3-38.3 ft.lbf}

Fig 3: Identifying Lock Bolt C & D
Courtesy of MAZDA MOTORS CORP.
Tighten the lock bolt A.
Tightening torque

37-52 N.m {3.8-5.3 kgf.m, 27.3-38.3 ft.lbf}

Fig 4: Identifying Lock Bolt A
Courtesy of MAZDA MOTORS CORP.
Tighten the lock bolt B.
Tightening torque

37-52 N.m {3.8-5.3 kgf.m, 27.3-38.3 ft.lbf}

Fig 5: Identifying Lock Bolt B
Courtesy of MAZDA MOTORS CORP.