LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 283 (Lubrication) >> Engine Oil Inspection

Engine Oil Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the vehicle on level ground.
  2. Warm up the engine to normal operating temperature and stop it.
  3. Wait for 5 min. 
  4. Remove the dipstick and inspect for oil level and condition. Verify that the oil level is within the F and L marks on the dipstick.
    • Add or replace oil if necessary.
  5. Verify that the dipstick O-ring is installed as shown, then reinstall the dipstick.
    Fig 1: Identifying Dipstick O-Ring
    G01913382Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals