LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Engine Mechanical Service Information) >> Rear Oil Seal Replacement >> Notes

Rear Oil Seal Replacement: Notes

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the flywheel. (MTX) (See CLUTCH UNIT REMOVAL/INSTALLATION .)
  2. Remove the drive plate. (ATX) (See DRIVE PLATE REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the figure.
    Fig 1: Replacing Rear Oil Seal (1 Of 2)
    G01913364Courtesy of MAZDA MOTORS CORP.
    Fig 2: Replacing Rear Oil Seal (2 Of 2)
    G01913365Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals