LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Engine Mechanical Service Information) >> Engine Tune-Up >> Engine Tune-up Preparation

Engine Tune-up Preparation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm up the engine to normal operating temperature.
  2. Shift the transaxle into neutral.
  3. Turn off all electrical loads.
    • Headlight switch
    • Fan switch
    • Rear window defroster switch
    • A/C switch
  4. Verify that the steering wheel is at straight ahead position.
  5. Connect the SST  (WDS or equivalent) to the DLC-2.
  6. Access RPM PID.
  7. Wait until the electrical fan stops.
    Fig 1: Locating DLC-2
    G01913372Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals