LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Engine Mechanical Service Information) >> Engine Removal/Installation >> Roll damper Installation Note

Roll damper Installation Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the rod and roll damper as shown in the figure.
    Fig 1: Assembling Rod And Roll Damper
    G01913369Courtesy of MAZDA MOTORS CORP.