LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Engine Mechanical Service Information) >> Cylinder Head Gasket Replacement >> Cylinder Head Removal Note

Cylinder Head Removal Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the cylinder head bolts a few turns in the order shown.
    Fig 1: Loosening Sequence Of Cylinder Head Bolts
    G01913350Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals