LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Engine Mechanical Service Information) >> Compression Inspection >> Compression

Compression Inspection: Compression

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Compression Pressure Specification
G01913327Courtesy of MAZDA MOTORS CORP.
  1. Disconnect the compression gauge.
  2. Install the spark plugs.

    Tightening torque 

    15-22 N.m {1.5-2.3 kgf.m, 11-16 ft.lbf} 

  3. Connect the ignition coil connector.
  4. Install the fuel pump relay.
scientia non olet · About LEMON Manuals