DTC P0705: Neutral Switch Input Circuit Malfunction: Condition
WARNING: This page is about a different car, the 2002 Mazda Protege5 and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
DTC is set when PCM has not received a neutral switch signal, when vehicle is driven at speeds above 19 MPH, stopped repeatedly and clutch pedal is depressed 10 times. This is a continuous monitor. MIL is illuminated when PCM detects malfunction during 2 consecutive drive cycles. Possible causes are:
- Neutral switch malfunction.
- Open in wiring between neutral switch and PCM.
- PCM malfunction.