Secondary Shaft: Disassembly

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, 2002 Mazda Protege, and 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Press off 4th gear with bearing. Remove retaining ring. Shift clutch hub sleeve to 1st gear. Press off 3rd and 2nd gears. Remove retaining ring. Press off 1st gear with 1-2 clutch hub assembly. Press off bearing on differential drive gear end of shaft. See Figure or Figure .