Nut, Cam Plate, & Adjusting Cam Bolt Installation Note
WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
- Install the cam plate so that the notch faces the same direction as the adjusting cam bolt.
- Align with the mark made before removing the adjusting cam bolt.
- Tighten the nut.
- Tightening torque: 50-69 N.m (5.1-7.1 kgf.m, 37-50 ft.lbf).