Stabilizer Bracket Installation Note

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Apply rubber grease to the inside surface of the stabilizer bushing.
Align the bushing with the inside of positioning plate on the stabilizer bar.

Fig 1: Installing Stabilizer Bracket
Courtesy of MAZDA MOTORS CORP.
Install the stabilizer bracket.

Fig 2: Installing Stabilizer Bracket
Courtesy of MAZDA MOTORS CORP.