LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Front Suspension) >> Front Shock Absorber & Coil Spring >> Front Shock Absorber Inspection

Front Shock Absorber Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front shock absorber from the vehicle.
  2. Inspect for damage and oil leakage.
  3. Inspect the rubber bushing for deterioration and wear.
  4. Compress and extend the shock piston at least 3 times. Verify that the operational force does not change and that there is no unusual noise.
    • Compress the shock absorber piston and release it.
    • Verify that the piston extends fully at a normal speed.
    • If not as specified, replace the shock absorber.
scientia non olet · About LEMON Manuals