Lower Arm Bushing (Rear) Installation Note

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Align the mark of the lower arm and the small projection of the lower arm bushing (rear) as shown in the illustration.

Fig 1: Aligning Marks On Bushings
Courtesy of MAZDA MOTORS CORP.
Set the lower arm onto the SST (49 B034 211).
Press the new lower arm bushing using the SST (49 B034 212).

Fig 2: Pressing Lower Arm Bushing

Courtesy of MAZDA MOTORS CORP.