LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Front Suspension) >> Front CROSSMEMBER >> Removal/Installation >> Crossmember Component Removal Note

Crossmember Component Removal Note

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support the crossmember using a jack and remove the bolts and nuts.
    Fig 1: Removing Steering Gear & Crossmember Component
    G00375805Courtesy of MAZDA MOTORS CORP.
  2. Remove the crossmember component.
scientia non olet · About LEMON Manuals