LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute 2WD L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Air Cleaner Fresh Air Duct/Hose >> Service and Repair >> Air Cleaner Outlet Pipe

Air Cleaner Outlet Pipe

Removal and Installation




1. Disconnect the air cleaner outlet pipe at the mass air flow/intake air temperature sensor.
1. Unclip the throttle cable from the outlet pipe.
2. Loosen the screw clamp and disconnect the pipe.




2. Remove the outlet pipe.
1. Disconnect the outlet pipe from the throttle body.
2. Unclip the hose from the outlet pipe.
3. Disconnect the crankcase vent tube and remove the air cleaner outlet pipe.

NOTE: The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.

3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals