LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute 2WD L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Air Cleaner Fresh Air Duct/Hose >> Service and Repair >> Air Cleaner Intake Pipe

Air Cleaner Intake Pipe

AIR CLEANER INTAKE PIPE

Removal and Installation

1. Remove the air cleaner. Refer to AIR CLEANER.

2. Remove the battery tray. Refer to BATTERY TRAY.




3. Remove the bolt and the intake pipe.

NOTE: Make sure the front sponge seal of the intake pipe is seated on the shroud panel correctly.

4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals