LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical - Overhaul - (LF, L3) >> Cylinder Head (I) Disassembly >> Camshaft Cap Disassembly Note

Camshaft Cap Disassembly Note

    NOTE:
    • The camshaft caps are numbered to make sure they are assembled in their original positions. When removed, keep the caps with the cylinder head they were removed from. Do not mix the caps.
  1. Before removing the camshaft caps, inspect the following:
  2. Loosen the camshaft caps bolts in 2-3 passes in the order shown in the figure.
    Fig 1: Camshaft Cap Bolt Removal Sequence
    G02831569Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals