LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.3L Service Information >> Crankshaft Rear Oil Seal Removal/Installation - 2.3L >> Removal

Crankshaft Rear Oil Seal Removal/Installation - 2.3L: Removal

  1. Remove the flywheel or flexplate. See FLYWHEEL/FLEXPLATE REMOVAL/INSTALLATION - 2.3L  .
  2. Remove the bolts and the crankshaft rear oil seal.
    Fig 1: Removing Crankshaft Rear Oil Seal
    G01922165Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals