LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Engine Controls [Removal & Installation] >> Engine Sensors & Switches >> Heated Oxygen Sensor >> Installation (B2300, B3000 & B4000)

Installation (B2300, B3000 & B4000)

  1. Apply anti-seize to sensor threads (if reusing old sensor or if new sensor is not coated with anti-seize).
  2. Install HO2S and tighten to specification. See TORQUE SPECIFICATIONS .
  3. Reconnect sensor harness connector.
scientia non olet · About LEMON Manuals