LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Controls [Removal & Installation] >> Engine Sensors & Switches >> Knock Sensor >> Removal & Installation (MPV, Protege & Protege5)

Removal & Installation (MPV, Protege & Protege5)

  1. Disconnect the knock sensor harness connector. See Figure or Figure.
  2. Remove the knock sensor.
  3. To install, reverse removal procedure. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals