LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Controls [Removal & Installation] >> Engine Sensors & Switches >> Cylinder Head Temperature Sensor >> Removal & Installation (B2300)

Removal & Installation (B2300)

  1. Disconnect the negative battery cable.
  2. Pull back the Cylinder Head Temperature (CHT) sensor cover and disconnect the harness connector. See Fig 1.
  3. Remove the CHT sensor. See Fig 2.
  4. To install, reverse removal procedure. See TORQUE SPECIFICATIONS .
Fig 1: Locating CHT Sensor Harness Connector - B2300
G00256143Courtesy of MAZDA MOTORS CORP.
Fig 2: Removing & Installing CHT Sensor - B2300
G00256144Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals