LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Controls [Removal & Installation] >> Engine Sensors & Switches >> Crankshaft Position Sensor >> Removal & Installation (B3000)

Removal & Installation (B3000)

  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
  3. Disconnect the Crankshaft Position (CKP) sensor harness connector. See Fig 1.
  4. Remove the bolts and the CKP sensor. See Fig 2.
  5. To install, reverse removal procedure. See TORQUE SPECIFICATIONS .
Fig 1: Locating CKP Sensor Harness Connector - B3000
G00252956Courtesy of MAZDA MOTORS CORP.
Fig 2: Removing & Installing CKP Sensor - B3000
G00252957Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals