LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Controls [Removal & Installation] >> Engine Sensors & Switches >> Camshaft Position Sensor >> Removal & Installation (Tribute 3.0)

Removal & Installation (Tribute 3.0)

NOTE: Numbers in parenthesis refer to numbers in the illustration.
  1. Disconnect the Camshaft Position (CMP) sensor harness connector (1). See Fig 1.
  2. Remove the bolt (2). See Fig 1.
  3. Remove the sensor (3). See Fig 1.
  4. To install, reverse removal procedure. See TORQUE SPECIFICATIONS .
Fig 1: Removing & Installing CMP Sensor - Tribute (3.0L)
G00264399Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals