LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Controls [Removal & Installation] >> Engine Sensors & Switches >> Camshaft Position Sensor >> Removal & Installation (Tribute 2.0)

Removal & Installation (Tribute 2.0)

  1. Disconnect the harness connector.
  2. Remove the bolt. See Fig 1.
  3. Remove the Camshaft Position (CMP) sensor. See Fig 1.
  4. To install, reverse removal procedure. See TORQUE SPECIFICATIONS .
Fig 1: Removing & Installing CMP Sensor - Tribute (2.0L)
G00143759Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals