LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Controls [Removal & Installation] >> Engine Sensors & Switches >> Camshaft Position Sensor >> Removal & Installation (B4000)

Removal & Installation (B4000)

NOTE: Numbers in parenthesis refer to numbers in illustrations.
  1. Disconnect Camshaft Position (CMP) sensor (1). See Fig 1.
  2. Removing the bolt (2). See Fig 1.
  3. Remove the sensor (3). See Fig 1.
  4. To install, reverse removal procedure. See Fig 1. See TORQUE SPECIFICATIONS .
Fig 1: Removing & Installing CMP Sensor - B4000
G00256182Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals