LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brake System & Drum Brake System >> Removal & Installation >> Front Brake Rotor >> Removal & Installation (4WD)

Removal & Installation (4WD)

  1. Raise and support vehicle. Remove front wheel assemblies and brake caliper. See FRONT DISC BRAKE PADS  . Remove the two front disc brake caliper anchor plate bolts. See Fig 1 . Remove the front disc brake caliper anchor plate.
  2. Remove and discard spring nut and slide rotor off hub. To install, reverse removal procedure. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Exploded View Of Front Brake Assembly (4WD)
G00281114Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals