LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 L4-2.3L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Powertrain Management >> Sensors and Switches - Ignition System >> Ignition Switch >> Testing and Inspection

Ignition Switch: Testing and Inspection

IGNITION SWITCH INSPECTION

1. Disconnect the negative battery cable.
2. Remove the column cover.
3. Disconnect the ignition switch connectors.







4. Inspect for continuity between the ignition switch terminals using an ohmmeter.
- If not as specified, replace the ignition switch.
scientia non olet · About LEMON Manuals