LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Suspension >> Rear Suspension System >> Rear Suspension >> Wheel Bearing - 2WD >> Installation

Wheel Bearing - 2WD: Installation

  1. Using the special tools, install the wheel bearing into the wheel knuckle.
    Fig 1: Installing Wheel Bearing Onto Wheel Knuckle
    G01150502Courtesy of MAZDA MOTORS CORP.
  2. Install the snap ring.
    Fig 2: Installing Snap Ring
    G01150503Courtesy of MAZDA MOTORS CORP.
  3. Using the special tool, install the wheel hub into the wheel bearing.
    Fig 3: Installing Wheel Hub Into Wheel Bearing
    G01150504Courtesy of MAZDA MOTORS CORP.
  4. Install the wheel hub nut.
    Fig 4: Installing Wheel Hub Nut
    G01150505Courtesy of MAZDA MOTORS CORP.
  5. Install the brake drum.
scientia non olet · About LEMON Manuals