LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Wheel Bearing >> Installation >> Vehicles with ABS

Vehicles with ABS

  1. Install the anti-lock brake sensor and tighten the bolt. See Figure .
  2. Install the tie rod end into the wheel knuckle. See Figure . Install the tie rod end nut. Install a new cotter pin.
  3. Install the wheel hub nut. See Figure .
  4. Install the brake disc. See REMOVAL & INSTALLATION FRONT BRAKE ROTOR for FRONT DISC BRAKE.
scientia non olet · About LEMON Manuals