LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Stabilizer Bar >> Removal And Installation

Removal And Installation

  1. Remove the LH wheel and tire.
    Fig 1: Removing Stabilizer Bushings
    G00375729Courtesy of MAZDA MOTORS CORP.
  2. Remove the two stabilizer bushings.
    1. Remove the four bolts.
    2. Remove the two stabilizer bushings.
    Fig 2: Removing Stabilizer Bar Links Lower Nut
    G00375730Courtesy of MAZDA MOTORS CORP.
  3. Remove the stabilizer bar.
    1. Remove the two stabilizer bar links lower nut.
    2. Remove the stabilizer bar.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals