Removal & Installation

Turn the ignition switch to the unlock position.
Remove the tire and wheel assembly. Refer to WHEELS AND TIRES .
Remove the castellated nut.
1. Remove the cotter pin.
2. Remove the castellated nut.
  
  Fig 1: Removing Castellated Nut
  Courtesy of MAZDA MOTORS CORP.
Loosen the tie rod end jam nut.

Fig 2: Loosening Tie Rod End Jam Nut
Courtesy of MAZDA MOTORS CORP.
Using the special tool, separate the tie rod end.

Fig 3: Separating Tie Rod End
Courtesy of MAZDA MOTORS CORP.
Remove the tie rod end.

Fig 4: Removing Tie Rod End
Courtesy of MAZDA MOTORS CORP.
To install, reverse the removal procedure.
1. Adjust the front toe. Refer to SPECIFICATIONS .