LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Steering >> Power Steering >> Power Rack & Pinion >> Adjustments >> Pinion Preload >> MPV

Pinion Preload: MPV

  1. Ensure steering rack is in center position. Using protractor (49-D032-316) and torque wrench, tighten adjusting cover to 15 ft. lbs. (21 N.m), then loosen cover 25-30 degrees. Apply sealant to threads of adjusting cover. Tighten lock nut to 37-50 ft. lbs (50-68 N.m).
  2. Check pinion preload. Install preload adapter (49-8038-785A) on pinon shaft. Measure pinion preload using spring scale. With steering rack in center position, pinion preload must be 1.8-3.0 lbs. (.8-1.3 kg). If preload is not as specified, loosen lock nut and readjust adjusting cover.
scientia non olet · About LEMON Manuals