LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Disabling & Activating Air Bag System >> Activating System >> General Activating Procedure (Seats Installed)

General Activating Procedure (Seats Installed)

  1. Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored energy. Remove air bag simulators from left and right front seat belt pretensioner harness connectors and reconnect connectors. Install pretensioner electrical connectors on retaining brakets.
  2. On models equipped with side air bags, remove air bag simulators from left and right side air bag module harness connectors and reconnect connectors. On all models, remove air bag simulator from passenger-side air bag module harness connector. Close glove box.
  3. Remove air bag simulator from clockspring harness connector and reconnect connectors. Install steering wheel access cover. Reconnect negative battery cable. With all air bags installed and connected, prove out system. See PROVE OUT SYSTEM  under DIAGNOSTICS. Reprogram pre-set radio frequencies and set clock.
scientia non olet · About LEMON Manuals