LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> General Information >> Restraints >> Air Bag Deactivation Procedures >> MAZDA >> Disabling & Activating Air Bag System >> Activating System (B Series Pickup)

Activating System (B Series Pickup)

  1. Ensure negative battery cable is disconnected. Wait at least ONE MINUTE. Remove air bag simulator from vehicle harness at base of steering column. Connect clockspring connector to vehicle harness. Install lower steering column opening finish panel reinforcement. Install lower steering column opening finish panel and hood release handle.
  2. Remove passenger air bag simulator from vehicle harness. Connect passenger air bag module connector to vehicle harness. Install glove box. Connect negative battery cable. See SYSTEM OPERATION CHECK .
scientia non olet · About LEMON Manuals