LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> General Information >> Restraints >> Air Bag Deactivation Procedures >> MAZDA >> Disabling & Activating Air Bag System >> Activating Air Bag System (Tribute)

Activating Air Bag System (Tribute)

  1. Ensure negative battery cable is disconnected. Wait at least ONE MINUTE. If equipped with side air bags, remove air bag simulator from driver side air bag harness. Connect driver side air bag harness to vehicle harness. Remove air bag simulator from driver side safety belt buckle connector. Connect driver side safety belt buckle connector to vehicle harness. Remove air bag simulator from passenger side air bag harness. Connect passenger side air bag harness to vehicle harness. Remove air bag simulator from passenger side safety belt buckle connector. Connect passenger side safety belt buckle connector to vehicle harness.
  2. On all models, remove passenger air bag simulator from vehicle harness. Connect passenger air bag module connector to vehicle harness. Install glove box. Remove air bag simulator from vehicle harness at top of steering column. Connect driver air bag module to vehicle harness. Install access cover.
  3. Connect negative battery cable. See SYSTEM OPERATION CHECK .
scientia non olet · About LEMON Manuals