LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycles >> 1996: MILLENIA, MPV, MX-5 MIATA, Protege & 1997: 626 (2.0L M/T, 2.5L), MX-6 (2.0L M/T, 2.5L), MILLENIA, MPV, MX-5 MIATA, Protege & 1998: MILLENIA, MPV, Protege & 1999-2000: MILLENIA, MX-5 MIATA >> Drive Cycle Procedure >> Drive Cycle-Mode 1

Drive Cycle-Mode 1

Start engine and warm to normal operating temperature. Ensure all electrical and A/C loads are off. Ensure ignition timing and idle speed are within specification. Adjust as necessary. SeeBASIC TESTING - 2.3L article. Ensure no jumper wires are connected to DLC. Increase engine RPM to specified speed. SeeFig 1. Operate engine at specified RPM for minimum of 15 seconds. Idle engine for more than 20 seconds with cooling fan disabled.

Fig 1: Drive Cycle-Mode 1 Engine Speed Table
G97E06607Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals