LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Mechanical - General Inspection >> Valve - Stem Diameter

Valve - Stem Diameter

WARNING: This page is about a different variant/trim than selected.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specification. Refer to SPECIFICATIONS .
    1. If out of specification, install new components as necessary.
      Fig 1: Measuring Valve Stem Diameter
      G01898631Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals