LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Mechanical - General Inspection >> Valve - Spring Squareness

Valve - Spring Squareness

WARNING: This page is about a different variant/trim than selected.
  1. Measure the out-of-square on each valve spring.
    1. Turn the valve spring and observe the space between the top of the valve spring and the square.
      Fig 1: Measuring Valve Spring Squareness
      G01898629Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals