LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Mechanical - General Inspection >> Valve - Seat Inspection >> Valve & Seat Refacing Measurements

Valve & Seat Refacing Measurements

WARNING: This page is about a different variant/trim than selected.
CAUTION: After grinding valves or valve seats, check valve clearance.
  1. Check the valve head and seat.
    1. Check valve angles.
    2. Check margin width.
    3. Be sure margin width is within specification. Refer to SPECIFICATIONS .
  2. Inspect for abnormalities on the valve face and seat.
    Fig 1: Inspecting Valve Seat
    G01898633Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals