LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Mechanical - General Inspection >> Valve - Guide Inner Diameter

Valve - Guide Inner Diameter

WARNING: This page is about a different variant/trim than selected.
  1. Measure the inner diameter of the valve guides in two directions where indicated. Refer to SPECIFICATIONS .
  2. If the valve guide is not within specifications, ream the valve guide and install a valve with an oversize stem or remove the valve guide and install a new valve guide.
    Fig 1: Measuring Valve Guide Inner Diameter
    G01898632Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals