LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Mechanical - General Inspection >> Cylinder Bore - Cleaning

Cylinder Bore - Cleaning

WARNING: This page is about a different variant/trim than selected.
CAUTION: If these procedures are not followed, rusting of the cylinder bores may occur.
  1. Clean the cylinder bores with soap or detergent and water.
  2. Thoroughly rinse with clean water and wipe dry with a clean, lint-free cloth.
  3. Use a clean, lint-free cloth and lubricate the cylinder bores.
scientia non olet · About LEMON Manuals