LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Mechanical - General Inspection >> Crankshaft Main Bearing Journal - Taper

Crankshaft Main Bearing Journal - Taper

WARNING: This page is about a different variant/trim than selected.
  1. Measure each of the crankshaft main bearing journal diameters in at least two directions at each end of the main bearing journal. Refer to SPECIFICATIONS .
    • If it out of specification, install new components as necessary.
      Fig 1: Measuring Crankshaft Main Bearing Journal Diameter
      G01898664Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals