LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Mechanical - General Inspection >> Crankshaft - End Play

Crankshaft - End Play

WARNING: This page is about a different variant/trim than selected.
  1. Measure the crankshaft end play. Use a Dial Indicator with Bracketry to measure crankshaft end play.
  2. Position the crankshaft to the rear of the cylinder block.
  3. Zero the indicator.
  4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play. Refer to SPECIFICATIONS .
    • If crankshaft end play exceeds specifications, install a new crankshaft thrust washer or crankshaft thrust main bearing.
    Fig 1: Measuring Crankshaft End Play
    G01898669Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals