LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Mechanical - General Inspection >> Camshaft - RUNOUT

Camshaft - RUNOUT

WARNING: This page is about a different variant/trim than selected.
NOTE: Camshaft journals must be within specifications before checking runout.
  1. Use a Dial Indicator with Bracketry to measure the camshaft runout.
    1. Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading.
    2. Refer to SPECIFICATIONS .
    3. If it is out of specification, install new components as necessary.
    Fig 1: Measuring Camshaft Runout
    G01898660Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals