LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Mechanical - General Inspection >> Camshaft - Lobe Lift

Camshaft - Lobe Lift

WARNING: This page is about a different variant/trim than selected.
  1. Use a Dial Indicator with Bracketry to measure camshaft intake/exhaust lobe lift.
    1. Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.
    2. Refer to SPECIFICATIONS .
    3. If out of specification, install new components as necessary.
    Fig 1: Measuring Camshaft Intake/Exhaust Lobe Lift
    G01898658Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals