LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Description & Operation >> Crankshaft Front Oil Seal >> Removal

Crankshaft Front Oil Seal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the timing belt. Refer to TIMING BELT .
  2. Remove the crankshaft sprocket and timing belt guide.
    Fig 1: Removing Crankshaft Sprocket & Timing Belt Guide
    G02170649Courtesy of MAZDA MOTORS CORP.
    CAUTION: Use care to avoid damaging the crankshaft surface.
  3. Using the special tool, remove the crankshaft front seal from the oil pump.
    Fig 2: Removing Crankshaft Front Seal From Oil Pump
    G02170650Courtesy of MAZDA MOTORS CORP.