LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.0L) >> Crankshaft Rear Oil Seal >> Removal

Crankshaft Rear Oil Seal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the flywheel. Refer to FLYWHEEL .
    2. CAUTION: Use care to avoid damaging the crankshaft sealing surface.
    Fig 1: Removing Crankshaft Rear Oil Seal
    G02170653Courtesy of MAZDA MOTORS CORP.
  2. Using the special tool, remove the crankshaft rear oil seal.
  3. Inspect the crankshaft rear oil seal area.
scientia non olet · About LEMON Manuals