LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Air Bag System) >> Diagnostics >> PID/Data Monitor & Record

PID/Data Monitor & Record

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. PID/Data Monitor and Record option allows technician using scan tool to read the state of several Parameter IDs (PIDs) to aid in diagnosing the system.
  2. Connect scan tool to Data Link Connector (DLC), located under instrument panel to right of steering column. Turn ignition switch to RUN position. Follow manufacturer"s instructions for scan tool being used. PIDs are continuously updated on scan tool display.
PARAMETER IDENTIFICATION INDEX AND VALUES

PID/Description Unit/Condition Condition/Specification
CCNT-RCM (Number of continuous DTCs) ... DTC is detected: 1-255
DTC is not detected: 0
D-ABAGR (Driver-side air bag module inflator No. 1 resistance; D-ABAGR2 (Driver-side air bag module inflator No. 2 resistance Ohm Under any condition: 1.5-3.7 ohms
D-CRSH-S (Driver-side air bag sensor state); P-CRSH-S (Passenger-side air bag sensor state); FNT-CRSH-S (Front air bag sensor state) OK/; COMM FAIL/; INT FAIL/ Sensor normal: OK
Sensor communication error: COMM FAIL
Sensor internal circuit abnormal: INT FAIL
DPTENSFLT (Driver-side pretensioner circuit state); P-PTENSFLT (Passenger-side pretensioner circuit state); DSB-P-ST (Driver-side pretensioner circuit state); PSB-P-ST (Passenger-side pretensioner circuit state) SHRT GND/; SHRT B+/; OPEN/; SQ-LOWRES/; NORMAL Short to ground: SHRT GND
Short to power supply: SHRT B+
Circuit open: OPEN
Pretensioner circuit resistance low: SQ-LOWRES
Circuits normal: NORMAL
DR-BUKL (Driver-side buckle switch state); PS-BUKL (Passenger-side buckle switch state) Buckled/Unbuckled Buckle switch ON: Buckled
Buckle switch OFF: Unbuckled
DR-CURTN (Driver-side curtain air bag module resistance); PS-CURTN (Passenger-side curtain air bag module resistance) Ohm Under any condition: 1.4-3.2 ohms
DR-PTENS (Driver-side pretensioner resistance); PS-PTENS (Passenger-side pretensioner resistance) Ohm Under any condition: 1.5-3.1 ohms
DS-AB (Left-side air bag module resistance); PS-AB (Right-side air bag module resistance) Ohm Under any condition: 1.4-3.2 ohms
DS-AB-ST (Left-side air bag module circuit state); PS-AB-ST (Right-side air bag module circuit state); DS-CURT-ST (Driver-side curtain air bag module circuit state); PS-CURT-ST (Passenger-side curtain air bag module circuit state) SHRT GND/; SHRT B+/; OPEN/; SQ-LOWRES/; NORMAL Short to ground: SHRT GND
Short to power supply: SHRT B+
Circuit open: OPEN
Pretensioner circuit resistance low: SQ-LOWRES
Circuits normal: NORMAL
DS1-STAT (Driver-side air bag module inflator No. 1 circuit state); DS2-STAT (Driver-side air bag module inflator No. 2 circuit state); PS1-STAT (Passenger-side air bag module inflator No. 1 circuit state); PS2-STAT (Passenger-side air bag module inflator No. 2 circuit state) SHRT GND/; SHRT B+/; OPEN/; SQ-LOWRES/; NORMAL Short to ground: SHRT GND
Short to power supply: SHRT B+
Circuit open: OPEN
Pretensioner circuit resistance low: SQ-LOWRES
Circuits normal: NORMAL
OD-D-CRSH (On-demand driver-side air bag sensor state); OD-P-CRSH (On-demand passenger-side air bag sensor state); OD-F-CRSH (On-demand front air bag sensor state) OK/; COMM FAIL/; INT FAIL/ Sensor normal: OK
Sensor communication error: COMM FAIL
Sensor internal circuit abnormal: INT FAIL
OD-DAB1-ST (On-demand driver-side air bag module inflator No. 1 circuit state); OD-DAB2-ST (On-demand passenger-side air bag module inflator No. 2 circuit state); OD-PAB1-ST (On-demand driver-side air bag module inflator No. 1 circuit state); OD-PAB2-ST (On-demand passenger-side air bag module inflator No. 2 circuit state); OD-DSAB-ST On-demand left side air bag module circuit state); OD-PSAB-ST (On-demand right side air bag module circuit state); OD-D-CURT On-demand driver-side curtain air bag module circuit state); OD-P-CURT (On-demand passenger-side curtain air bag module circuit state) SHRT GND/; SHRT B+/; OPEN/; SQ-LOWRES/; NORMAL Short to ground: SHRT GND
Short to power supply: SHRT B+
Circuit open: OPEN
Pretensioner circuit resistance low: SQ-LOWRES
Circuits normal: NORMAL
P-ABAGR (Passenger-side air bag module inflator No. 1 resistance; P-ABAGR2 (Passenger-side air bag module inflator No. 2 resistance Ohm Under any condition: 1.4-2.9 ohms
RCM-VOLT (IG1 voltage) Volt Ignition switch in ON position: B+
Other: 0 volt
TRAK-SW Forward; Rearward Front seat front position: Forward
Front seat rear position: Rearward
DIAGNOSTIC SYMPTOMS

Condition Go To Test
AIR BAG warning light does not illuminate TEST A 
AIR BAG warning light on continuously TEST B 
FAULT CODE/FLASH CODE IDENTIFICATION

Fault Code/Flash Code Go To Test
B1231/13 (1)
B1342/12 (2)
B1426/57 TEST C 
B1427 TEST C 
B1869 TEST D 
B1870 TEST D 
B1877/33 TEST E 
B1878/33 TEST E 
B1879/33 TEST E 
B1881/34 TEST F 
B1882/34 TEST F 
B1883/34 TEST F 
B1885/33 TEST E 
B1886/34 TEST F 
B1913/19 TEST G 
B1913/21 TEST H 
B1916/19 TEST G 
B1925/21 TEST H 
B1932/19 TEST G 
B1933/21 TEST H 
B1934/19 TEST G 
B1935/21 TEST H 
B1992/22 TEST I 
B1993/22 TEST I 
B1994/22 TEST I 
B1995/22 TEST I 
B1996/23 TEST J 
B1997/23 TEST J 
B1998/23 TEST J 
B1999/23 TEST J 
B2228/19 TEST K 
B2229/21 TEST L 
B2230/19 TEST K 
B2231/21 TEST L 
B2232/19 TEST K 
B2233/21 TEST L 
B2234/19 TEST K 
B2235/21 TEST L 
B2434/51 TEST N 
B2435/51 TEST N 
B2438/52 TEST O 
B2439/52 TEST O 
B2444/43 TEST P 
B2445/44 TEST Q 
B2691/51 TEST N 
B2692/52 TEST O 
B2296/42 TEST M 
B2773/24 TEST R 
B2774/24 TEST R 
B2775/24 TEST R 
B2776/24 TEST R 
B2777/25 TEST S 
B2778/25 TEST S 
B2779/25 TEST S 
B2780/25 TEST S 
B2867/31 TEST T 
C1947/49 TEST U 
C1948/49 TEST U 
C1981/49 TEST U 
U2017/43 TEST P 
U2018/44 TEST Q 
(1) SAS control module activation (deployment) control freeze. Replace SAS control module. See SAS CONTROL MODULE  under REMOVAL & INSTALLATION.
(2) SAS control module malfunction. Replace SAS control module.