LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Mechanical (Service Information) - 2.5L) >> Front Oil Seal Replacement >> Front Oil Seal Installation Note

Front Oil Seal Installation Note

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply clean engine oil to a new oil seal lip.
  2. Push the oil seal in slightly by hand.
  3. Tap the oil seal in evenly using the SST  and a hammer.
    Fig 1: Installing Front Oil Seal
    G01136307Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals